VPN and Proxy Setup on a Router
Running a VPN or proxy client on a router can cover devices that do not have their own client, such as a TV or game console. It also makes troubleshooting more involved: one setting may affect every device in the home.
Check the router first
Support depends on the router model, firmware and available memory/CPU. A provider's configuration will not automatically work on every router. Check the firmware's official documentation and confirm that the required protocol and routing features are supported.
Plan the scope
Decide whether all devices should use the tunnel or only selected devices. Some router software supports policy routing by device or destination; other setups route everything through one connection. Keep a direct-access path for administration so a failed profile does not lock you out of the router.
Make a backup before changing routes
Export or record the current configuration before installing packages or importing new rules. Test with one device first, then expand to the rest of the network. Check DNS, IPv4/IPv6 and any existing VPN feature to avoid overlapping routes.
If the connection fails
Restore the known-good configuration before experimenting further. Compare direct internet access with the tunnel enabled, and check router logs as well as the client log. A router CPU limit can also affect throughput, so do not assume every speed drop is caused by the provider.
See system proxy vs TUN, DNS basics and connection testing.