Skip to content

DNS Resolution Fails or Some Domains Will Not Open ​

DNS translates a domain name into an IP address. If the client appears connected but domains fail to load, check whether the issue is name resolution or the connection itself.

Separate DNS from general connectivity ​

Try a few unrelated sites. If one domain fails while others work, the target or its DNS records may be the issue. If many domains fail but direct IP access works, DNS is a stronger suspect. Avoid using only one test site to draw a conclusion.

Check recent changes ​

Look at the DNS mode in the client and the operating system. If you recently enabled a custom resolver, encrypted DNS or a new rule set, temporarily return to the previous known-good setting and test again. Change one setting at a time.

DNS and routing can disagree ​

A client may proxy web traffic while sending DNS requests through a different resolver. That can cause different results by mode or network. If you use TUN, review both the DNS configuration and the route rules that apply to DNS traffic.

After changing a setting ​

Clear the OS or browser DNS cache only if relevant, restart the affected app and repeat the same test. Record which domain failed, which network you used and whether the failure happens in direct mode too.

See the DNS basics guide and system proxy vs TUN.

VPN Finder · VPN, proxy and network tool guides